Everybody Using vacuum cleaner – whether it be cleaning your office or home, it offers you one of the fastest and easiest ways to do it. And if you own one of the robotic vacuum cleaners, you have one of the best and most Intelligence Technology related
They are user-friendly, and you can do everything from running it to maintaining it yourself – no need to call in professionals every time you want to repair or clean your vacuum cleaner.
You can see the comparison of Roomba 690 vs 890 robot vacuum cleaner.
How does a Robotic Vacuum Cleaner Work?
Plastic Dustbin in the vacuum cleaner relieves you from changing the disposable bags frequently. All the dust and litter gets stored in the plastic bin instead of those bags. But it is recommended to clean the dustbin often in order to avoid clogging and problems in the suction.
Then, there is the suction that can such in all dirt you see on the floor. It may even have a mop attached to it so that it can clean the floors in a gleaning way.
The only thing you have to worry about is that you have to clean the dust it collects. As a good practice, you can actually empty it after every time you vacuum a huge and dirty area. Also, if the dust is left for a longer time, it makes unpleasant and may also lead to some bad odor in your apartment.
The Top Tips to Help You Get the Most Out of the Robotic Vacuum Cleaner
Don’t worry; emptying the dustbin is a very simple procedure. Just follow our step by step guide and emptying it and keeping it clean, so you don’t have to worry about it.
1. The first step is to clean the rotating brush
In order to do this, you need to first take your vacuum cleaner and lay it on the ground in order to make sure your rotating brush is visible. You can then put a little sheet or a waste towel to get all the dirt out on it.
Make sure that there are no strings or strands of hair that entangle your machine. In case you see something like that, and then use a scissor to cut them away.
2. The second step is to clean the canister
Normally, it is fine even if you just empty the dirt, but as a good practice, you can try to do something more than that. You can try to clean the canister with soap and water at least once a month. You can use warm water with some soap in it to make sure it is cleaned properly.
Just cleaning it with water might not be as effective. There are no electrical connections in this part so you can submerge in soapy water to get the best results. After finishing the cleaning, you can open the two ends of the canister and leave it outside to dry completely.
3. The third step is to clean the filters
You will find one or sometimes more than one foam rubber filters or felt filters when you remove the canister. You can take them out gently and make sure you place them in the right order so that it is easier for you when you are assembling them back.
Once you have placed them out, gently wash the foam as well as the felt filters. You need to be very careful while washing them in order to avoid them from getting damaged. However, it is important to remember that you need to first dry the filters before they are ready to be placed back. You can put them outdoors to make sure that they are dried completely.
What To Do After Using vacuum cleaner Parts?
After washing and Using vacuum cleaner by using the above-mentioned steps, make sure that all the parts are dried completely before you can assemble them back. Even a drop of water can lead to bigger problems in your vacuum cleaner.
Best ways for drying the parts is to put them in the sun. You can also sometimes use a hairdryer. However, do remember that all the parts need to be completely dry before you assemble them.
You can do a great many things with your robotic vacuum cleaner like:
– Scheduling when you want to clean your home
– Collect dust as and when you like
– Clean even carpets easily with more suction power
– Map and clean your floor in an organized way – Get back to the charging station to charge itself automatically.