There are several different material options for the exterior walls of the house: wood, metal, stone, vinyl, brick, fiber cement, stucco, etc. But, watching the materials for siding is simply scratching the cement backer board the surface! Delving deeper, we see more options and sub-options.
The only limitation is your imagination. In this guide, we will cover the main options and several sub-options. Special note: All cost-related information is based entirely on 2019 information.
Siding is an important part of the exterior of your house. Whether you choose vinyl, wood, cedar or aluminum siding. You want to continue with annual maintenance and upkeep to ensure your home stays healthy and happy. However, when it comes to cedar siding, it requires a lot of maintenance, although the aesthetics are well worth the extra work.
But which one is true for you?
Cedar siding is usually composed of western red cedar, but white cedar is sometimes used. It is commonly used in horizontal lap plates or traditional strip or “shake” plates. It is often painted or treated with stains, oils, or may be untreated.
Fiber cement siding may be an artificial product. Made of a composite of sand, cement and cellulose fibers. Press together to make planks or shingles. It can be primed and painted, but it can also be painted after installation.
Each has its own benefits, so there are variety of belongings you should confine mind:
Cedar Siding Aesthetics
Cedar siding is available in a variety of styles, including lap siding, beveled and traditional cement-lined cedar wood or shingles.
You can also get a modern, seamless look with a tongue and groove panel, or a rustic look with wooden boards and slats.
Cedar Siding Pros:
The advantage of cedar shaking the side plate is that you can choose a beautiful side plate. Cedar may be a timeless classic material that has been in existence for a long time. You will get the smooth finish of cedar wood siding. Oil or stains at a glance will take you home. You will cherish the unique charm of years.
Cedar anti-shake siding is very durable. Because it is immune to decay caused by water or insects. Cedar even kills crushing and other bacteria’s natural preservatives. Cedar is a safe and environmentally friendly natural material. Resources are also biodegradable and therefore environmentally friendly. Cedar siding is worth paying attention to once it is running.
Cons of Cedar Shake Siding
Although there are many advantages to cedar shaking houses, there are also some disadvantages. Cedar swaying houses cost more and are expensive to maintain. Because it has to be painted or dyed. Take care of its appearance every three to five years. Unfortunately, if you have painted cedar-shaking siding, you can’t just apply an alternative coating on it-you need to break the old paint and then repaint. Another time you need to decide if you have to replace the cedar siding of your house once.
If the cedar shake wall panel is unpainted or finished every few years. It rots easily, and vinyl siding does not pose this risk. Cedars are also vulnerable to birds such as woodpeckers. The risk of using cedar wood siding is higher because cedar is more vulnerable to fire damage than vinyl or other non-wood siding, even when treated with flame retardants.
3. Fiber cement
The main options are related to the way the structure is installed, such as bevels, shingles, planks and battens, and logarithms of divisions. There are many sub-options because the wood has a variety of textures, how some cement backboards chop / shape it, and thousands of color options.
In this category, we include engineered wood. Also called composite wood, artificial wood or wood-based panel. Natural wood apparently comes directly from the wood, while artificial wood is made from wood fibers, sawdust and binders. This is a powerful, lightweight and inexpensive alternative. Rather than cutting logs into pieces, fabrics are made to match the order of use.
Wood Siding Costs Installed, Plus ROI
Natural wood material is comparatively expensive, considering the value of initial investment and therefore the ongoing maintenance costs.
On average, natural wood siding costs between $7.50 to $12.50 per sq. ft. installed.
This range depends mainly on textures and levels, but also because of style options. Prices will be higher in other affluent areas, given that natural wood is a premium material
Installation costs for artificial wood range from $ 5.50 to $ 11.50 per square foot. The $ 10 to $ 11.50 range is high end. A fairer range is $ 7.50 to $ 9.50 per square foot installed. This feature usually requires less maintenance.
There will be a fairly wide selection of installation prices for the entire home, but this is usually due to regional and contractor price changes. If there are other factors.
Grains and Grades
Natural wood benefits from a variety of options for natural selection production. For residential siding, the type of tree (cereal) is usually used. Used: pine, oak, spruce, cypress, cedar, rosewood.
Most wood siding projects. Cut the supply board or plank. The appearance of this surface indicates another level of sub-option processing. You can see knotted or other defective boards. Considered low-grade and cheaper
For building structures, this is usually fine because no one will see it. This is allowed for siding covered with paint. Other than that, it’s a matter of subjective choice.
Fiber Cement Siding Aesthetics
Like cedar, fiber cement often doesn’t reach many styles like lap or clapboard, clapboard and plank and lath. There are also various surfaces that imitate the wood grain, from a contemporary smooth surface to a more rustic, rough-hewn look.
Fiber cement honestly reproduces the design of lacquered wood. If you examine it closely, you will find that the grain is probably too even and excellent to be real wood.
But on the side of the road it is so similar to wood that it is almost impossible to tell the difference.
In fact, wood panel replacement has been approved in historic districts across the United States, including the Rhinebeck, Kingston, and LaGrange village here in the Hudson Valley.
Take a look at some close-ups and see how well fiber cement stacks up against wood …
One aspect where fiber cement cannot compete with cedar wood is that you want to use a transparent sealant or semi-transparent stain to expose the natural wood color underneath.
Fiber cement can only replicate the design of lacquered wood.
Some homeowners like the look of weathered white cedar and leave it untreated to get a silver patina over time.
Fiber cement cannot reproduce this weathered patina, so you need to use cedar to achieve this look
Neither wood siding or fiber cement is the most cost-effective option for home siding. Fiber cement is usually slightly more expensive on vinyl siding, with materials ranging from $ 3 to $ 4 per square foot. Cedar siding can run from $ 5 to $ 7 per square foot.
You should also be aware that the maintenance costs required for cedar siding add to the total cost of thousands of dollars. You must paint or stain cedar siding every 3-5 years and regularly repair or replace shingles or panels.
Therefore, be sure to consider the long-term costs of cedar when making a decision.
With fiber cement’s virtually maintenance-free durability, you end up saving thousands of dollars.
Durability & Maintenance
With proper maintenance, cedar siding can be used for many years. Cedar is a very durable wood that has better resistance to decay and insects than other types of wood.
For cedar, the most important thing is to minimize exposure to moisture, which can cause decay.
Paint will need to be scraped every 5 years, while stains will need to be reapplied every 3 years.
Cedars are easily damaged by woodpeckers, which drill holes in the walls of wood boards, allowing insects and moisture to penetrate-not good.
The maintenance cost of fiber cement is extremely low, and it only needs regular cleaning with a hose. Paint finish
James Hardie siding is guaranteed not to fade or crack for 15 years.
Fiber cement is also very durable. Because of its high cement content, it is immune to termites, woodpeckers and other pests.
It prevents decay, warping and cracking. It can withstand the extreme weather of cement liners, including rain, snow, hail, hot sun, and even hurricanes.
That’s why high-volume U.S. hurricanes and tornadoes specify fiber cement wallboards in their building codes.
Additional Consideration for Stone Veneer
In the last section “Unleashing the Imagination” (below), we mentioned combinations and siding. Stone finishes are arguably the materials most likely to be combined with other materials. There are houses with all stone veneers, so the full benefits of the benefits mentioned above can be realized. However, often you will see stone cladding installed near the front of the house to highlight specific features. Even if it is rarely used, the stone can show a magnificent appearance.
Unleashing Your Imagination
As if the thousands of sub-options we mentioned or implied in this article are not enough, there is one final point about material combinations.
Stone works well with most other materials, especially wood. Wood and vinyl or fiber cement tend to accumulate on one side (usually wood), thus creating another (more durable) at the bottom of the rock. Unable to browse all possible combinations.
We recommend driving near you and searching for existing combinations that are obviously effective in your area.
Wood siding encompasses many styles, shapes, grains and grades / quality. Here we’ll specialise in the shakes and shingles for style and shape with cedar because the grain.
Cedar shakes and shingles are literally two very different styles, although they are often referred to as just one style. Both are shorter vertical boards that are installed in an overlapping manner.
Traditionally, shaking is cut with an axe, while shingles are sawn. In today’s world, it’s likely to be both sawn and shaken, like cutting an axe on a surface. Historically, shaking heads tend to be wider than shingles.
Although wooden siding is less popular, the cedar and shingle show the sweetness of the wood in a prominent way. Due to mostly manual reasons, it tends to be more expensive than other wooden siding options and has advantages over other wooden siding options.
The installation method for cedar shingles is the same. The costs are virtually equal, differing only in the quality of the wood and the additional building materials.
A carpentry person can do the job, although a knowledgeable installer can handle all aspects of the project more efficiently, while also being equipped with the right equipment and getting insurance. In terms of products and repairs, there are also warranties to consider.
The average installation cost for cedar wood roof panels and wobble siding is $ 6.50 to $ 13.00 per square foot. The quality of the wood, the size of the board, the choice of style and regional factors all determine to some extent why this range should be considered.
We’ll delve into the factors that affect costs, but you want to pay a total of $ 15,000 to $ 28,000 for a typical two-bedroom home.
Before looking at the factors that affect costs, let’s look at what a particular job needs to do and break down its costs. This is usually an estimate you get from a knowledgeable contractor. Please note: These are estimated national averages. Our next section will introduce other cost factors that affect prices.
White Cedar Shingle transparent siding: 2,000 square feet x $ 8.50 = $ 17,000 (including labor)
Remove previous house siding: $ 1,600
Waste rent / disposal fee: $ 900
Plastic wrap: $ 250
Additional construction materials: (e.g. wool tops, galvanized nails, waterproof panels) = $ 600
Building permit: $ 250
Total project cost = $ 20,600
Factors Impacting Overall Costs
For almost all siding work, the main consideration is the removal and disposal of the previous siding.
Experienced staff can remove it every day and can rent huge trash cans to handle materials. It is conceivable that this may lead to necessary repairs to the exterior walls of the house, which may also cause additional costs, but this is the easiest time to deal with such resistance.
The style options for the shake and shingle are primary factors impacting the value . You’ll select between white and red cedar.
Red cedar is considered a higher material choice for a variety of reasons, although many of them are subjective. Red cedar is never painted, while white cedar is usually stained and sometimes painted, so more ongoing maintenance is required.
In addition, red cedar is also considered to be more durable or able to withstand years of weathering. To sum up, red cedar is more expensive than white cedar.
After choosing the type of cedar wood, you may pay most attention to the grade of the fabric. From clear to knotted, or from different to premium to flawed. But, like most things about style, this is usually a touch subjective.
Some people think that natural imperfections in wood (such as knots) are part of the appeal, and if you want to save a lot of money, this is usually a factor you need to consider.
The next consideration is the thickness of the board. Similarly, shaking is often thicker than shingles. Higher density usually means more money.
Another option is the shape of the bottom edge of the rock, which contains straight edges, staggered edges or fragments of different lengths, and finally round or wavy edges. The last one is often more expensive. Straight edge pieces tend to be uniform in shape and size, so they are the cheapest option.
Additional building materials are items which will be included within the siding costs, and not separate line items.
Obviously, you need to nail the fabric to the wall, and flashing or curved stripes along the edges are part of what makes the job happen. All of these are usually possible, but $ 1.00 per square foot.
Not mentioned in our example project are stains on wood. This is an optional item, but it can greatly increase the price.
Generally, the price of dyeing or painting wooden floors is about $ 2.00 per square foot, but this depends on the layout of the house.
Labor is the last factor. Other wood siding options require less labor because the boards are longer and easier to place. If multiple layers are involved or sometimes called double compensation, labor costs will rise.
Another aspect that adds cost is waste, which is more likely to occur on cement linings that use smaller boards.
Yet, knowledgeable installer if much more likely to possess less waste and can calculate this upfront supported their experience.
An inexperienced installer may not purchase wasted materials, so you may buy more materials.
Good, bad, so beautiful
Here we list why you should consider the advantages, disadvantages and main reasons of cedar and strip siding.
Pros: The sweetness of wood may be an important reason for anyone to choose it as a siding material.
With multiple options, including shaking and shingles, this is a truly unique look that is prone to aging, especially if properly maintained. Although relatively expensive compared to other wooden siding, it still has fewer options than fiber cement or stone siding cement backing, comparable to premium vinyl siding.