When it comes to an online quote for a kitchen countertop, most people run into a problem. They do not know or have doubts about how to measure the countertop correctly. That is something that makes it difficult to ask for different quotes online to compare. Today we will explain what is a linear foot, and how to ensure that we are providing the correct measures.
Most companies that offer the possibility of making estimates online will ask you for the countertop measurements to provide you with a price that will be subject to the review of those same measurements by a company technician. So in this sense, you should not worry if you have passed any information that is not correct.
Since they will always give the final price after verifying that the kitchen countertop measurements are accurate. If they were not, the company would prepare a final budget with the professional technician’s modifications.
Today, we will talk about the recommendations to measure a kitchen countertop to request quotes online correctly. If you want to know how not to make mistakes when measuring a countertop, do not stop reading this article.
What is a linear foot?
The unit for measuring the length and width of an object is a linear foot. You will need to measure your linear foot when you are going to build a house. There is usually no difference between regular feet and linear foot. This type of measurement typically used to denote the length of a piece of wood. The foot is no longer a commonly use measure. Although it standard in the United States and is currently used in addition to the UK metric system measurement.
An ancient unit of linear foot measurement has used in one form or another for thousands of years. The foot’s exact size varied from country to country. And even from person to person and was not officially standardize on international lines until 1959. When it gives a precise metric equivalent of 1 foot to 0.3048 meters. It is still in use today. Previously, it standardized one-foot length with different lengths. That were about 0.0 meters apart in individual countries. This is possible because the size of the actual human foot varies from person to person. Board yards often use the term linear foot exchange with feet to describe the length of the board. The term foot measurement also commonly used to measure wood and refers to an inch thick board area.
Now, possibly you would like
to know the exact price before calling any company to go and measure it. Since, if you finally do not buy the countertop from them. Most will charge the visit for incurring travel and handling costs. Which is the work of the meter technician. Surely you want to compare the price of different companies.
But not pay the visit to each of them. Therefore, the key is to provide the correct measurements to each of these companies online so that the budgets that they offer you online are as tight and accurate as possible. In this way, you can compare via the Internet and then decide the company you will buy the countertop from.
That will be the one that will perform the measurements at your home, but you will have ensured that the budget does not vary or that this variation is minimal. In addition to that, then they will not charge you for the visit to measure the countertop.
At first, you have to know what form it will take the counter. It can be in L, in U, linear to the wall, two linear facing each other. It is not the most important thing since we will make a total sum of linear meters in the end. But it is vital that you understand what to take into account when measuring, so you can know your countertop measurements, whatever their shape.
To know the countertop’s length, we must always measure from wall to wall and from behind.
How many centimeters is afoot?
Discover the equivalence of a foot with centimeters. Unit of measurement is used in Anglo-Saxon countries and is also used to express height. You can also discover this unit of measure’s origin and other equivalences with the foot’s action.
The foot is a unit of measurement that helps us measure length. It used in the Anglo-Saxon measurement system. So its use is not widespread, although it is still an essential measurement in aeronautics.
One foot equals 12 inches. This measurement given by the estimated length of a human foot.
It causes discrepancies with other measurement systems since there are different foot measurements in ancient civilizations.
As we said, this measure of length used in countries such as the United States, Canada, and the United Kingdom. Especially to locate the height of an airplane or other aerial vehicles. However, it is also common to use it as a measure to express measurements.
There also the timber foot or block foot used in the wood industry. But in this case, it is also a unit of volume. 1 lumber foot is equal to 2.359.737216 cm3.
The case of linear countertops is the simplest:
Measure from one end to the other, regardless of columns or other elements. Remember always to do it from behind, even if it seems to you that in this case, it does not matter, you will avoid mistakes, and you will get used to always doing it the right way.
If they two linear facing each other and each of them align to a different wall, you only have to add them.
The longest side is the same as for a linear countertop – measure end to end, wall to wall.
Write down the total meters of side A
The other side of the L, painted in a lighter color in the image. As you can see, you should not measure to the end of the wall since the piece or square. Where the two sides coincide will already covered by the measure.
Remember to measure from behind. In this case, it is crucial since if we did it from the front. We would let ourselves measure that same square that we talked about before belonging to side A
Write down the total meters of B.
Add A + B, and you will have a total of linear meters.
To measure a U-shaped countertop:
Make and record the measurements of A and B as we have explained in the L-shaped countertop.
The new side C, also indicated in the image in another color for clarity as possible, maybe the same length as A or be different, more or less long.
Wood is a natural material. Therefore, it has different defects and characteristics that need to know and consider for any application that you want to give it. The classification by categories of the sawn wood allows determining to a large extent. The value and possible potential use of each table.
The grade of wood purchased by the manufacturer determines the cost and residual factor achieved.
Because grades based on the percentage of clean wood in the chart. Many of the hardwoods’ natural aesthetic characteristics not considered when calculating net yield.
Higher grades, including FAS, One-Sided FAS (FAS / 1F), and select best suited for long moldings. The joinery products such as door frames and architectural interiors. And furniture applications, which require a high percentage broad cuts.
FAS ONE SIDE (FIF)
It derived from the original “First And Seconds” grade. The FAS grade provides the buyer with long, clean cuts best suited for high-quality furniture, interior joinery, and solid wood trim. The minimum size of the boards is 6″ comprehensive and eight ‘long.
Besides, it includes a range of boards that go from 83 1/3% (10 / 12th) to 100% clean woodcuts on the board’s total surface. Clean cuts must be a minimum size of 3″ wide by seven ‘long, or 4″ wide by 5’ long. The number of reductions allowed depends on the table’s size.
Although most tables will enable one to two cuts. The minimum width and length may vary depending on the table’s species and green or stove.
The best face must meet all the fas requirements, while the poor face must meet Common Mo grade requirements. 1. Thus, the buyer is assured that he will have at least one FAS face.
FOOT TABLE: What is a linear foot?
A board foot is a unit in which wood is measured.
One board foot equals one foot long x one foot wide x one inch thick (one foot = 0.305m, one inch = 25.4mm).
The formula to determine a board foot on a board or plank is:
(Width in inches x lake in feet x thickness in inches) divided by 12.
The percentages of clean wood required for each grade are based on this 12′ measurement.
Example:
The table above is 2 “thick, 6¼” wide, and 8 ‘long, so 6¼ “÷ 12 x 2” x 8’.
When preparing a package, the width and length of the boards are recorded. Widths greater or less than a half-inch are rounded to the nearest whole inch, while widths that equal precisely one-half inch are rounded either up or down randomly. Lengths between full foot unit increments are rounded to the next lower integer. For example, the values for a 5 ¼” wide and 8 ½” long table are set to 5″ and 8 ‘.
FAQ of What is a linear foot?
-
How to calculate the board feet that are in a wooden package?
First, calculate the surface measurement of a layer of boards. The package’s width, minus the spaces between the tables. By the length of the box and divide the result by 12. If there are different lengths in the package, use an average size. Once the measurement of a layer is calculated, multiply the result by the total number of layers.
- How long is a linear foot?
It is used in the Anglo-Saxon measurement system, so its use is not widespread, although it is still an essential measurement in aeronautics. One foot equals 12 inches.
-
How to calculate linear feet to square feet?
To calculate a room’s area in square feet, measure the room’s length and width in feet, then multiply these figures together to get a place in square feet. For example, a 12-foot x 15-foot room can be said to have an area of 180 square feet (12 x 15 = 180).
- How much is a foot of wood in cm?
In the metric system, a square foot of wood is equivalent to a square piece with a volume of 30.48 cm on a side by 2.54 cm thick. Its equivalent in the Anglo-Saxon system is 12 inches per side by 1 inch thick.
- How to calculate square feet for tile?
In the slabs, you should always buy more. To calculate the amount of glue needed, you divide the area by 40, which is the approximate square footage that a 50 lb. bag will cover with a 1/2 “x 1/2” trowel.
-
How to calculate the amount of wall ceramic?
To calculate how many tiles we need, we must multiply the amount that can fit in a square meter by the total meters of the surface, 12 m2. Knowing the number of units required, we can calculate how many boxes of each type of ceramic we need.
- How does the foot abbreviate?
The foot abbreviates with the letters ft from the word feet, feet in English, which gives its name to this measurement unit.
Conclusion of what is a linear foot?
Generally, wood classified based on the size and number of cuts obtained from aboard and use in the manufacture of products. High grades provide the buyer with long clean pieces while cutting common ones back into smaller clean pieces.
Common grades, mainly standard number 1 (No. 1c) and typical number 2 (No. 2C), seem to be the most appropriate for the kitchen cabinet industry. For most furniture, and flooring. Planked or stave wood. You should note that you will obtain the same clean high-grade wood once the common grade pieces are trimmed. But in minor cuts (either lengthwise or widthwise). The grade name is only used to designate the percentage of clean wood in the boards and not its overall appearance.
